Diffusers & Aerators for Waste Water Treatment
& ETP Sewage Treatment plants
High Performance Fine Bubble Membrane Diffuser For Waste Water Treatment Aeration - POLYFLEX ™ & POLYPOR ™

UNIQUE DESIGN BLINEX's POLYFLEX ™ & POLYPOR ™ unique open-end tube design diffuser allows water to completely fill the diffuser support tube, thus eliminating diffuser buoyancy and not allow Diffuser to bounce during operation and there is not breakage / failure of nipple end connection.

Properties:
  • Filter the finest suspended particles.
  • The cartridges have uniform pore size, smooth surface, lightweight, odorless, tasteless, non-toxic, and resistant to shocks and impacts
  • The unit withstands the pressure up to 150 PSI.
  • The flow rate form 4 to 15 LPM in different microns cartridge

Typical Application:
  • Bio-logical waste water treatment
  • Used in streams & fish ponds (Aquaculture)
  • Activated sludge waste water aeration
  • Industrial waste water treatment plant
  • Municipal waste water treatment plant
  • Waste water ozone diffusion
  • Oxygenation for sludge stabilization
  • Recarbonation, Nitrifications, Grit tanks, Grease removal and Floc-Agglomeration
  • Contact aeration system
  • Sequencing batch reactor (SBR)
  • Lagoons & Channels

FINE BUBBLE MEMBRANE DIFFUSERS
SOTE 5.0 - 7.6 Kg O2 / kwh
50% Power Savings
Trouble free operation
FIXED AERATOR

1.2 - 3.1 Kg O2 / kwh
Power consumption is high
Regular maintenance
FLOATING AERATOR

1.2 - 2.2 Kg O2 / kwh
Power consumption is high
Regular maintenance

Advantages
  • High Oxygen transfer efficiency
  • Self cleaning operation
  • Fine bubble formation
  • Non - clog operation
  • Intermittent operation without water back flow
  • Easy & quick to install
  • No moving part - assures safety
  • Material resistant to waste water
  • Unbreakable, light weight & Heavy duty membrane to withstand high pressure
  • Low pressure loss across diffuser
  • Economic operation due to low investment & operation cost
  • Through intermixing of water and sludge components & uniform concentration of oxygen throughout the tank
  • Negligible emission, odour, aerosols & noise
  • Enormous power saving